tp link wireless usb adapter driver archer

#TP LINK WIRELESS USB ADAPTER DRIVER ARCHER INSTALL#
#TP LINK WIRELESS USB ADAPTER DRIVER ARCHER DRIVERS#
#TP LINK WIRELESS USB ADAPTER DRIVER ARCHER PC#

You will find only drivers for Windows and MacOs!

Although CoolBblue claims on their site that it’s compatible with Windows and Linux, I couldn’t find any driver files on the CD that it’s delivered with the adapter. The adapter didn’t work out of the box just like it did on Windows 10! To make it even worse, the adapter doesn’t come with any driver installation for Linux. Since I use Ubuntu as well on that PC, I also need internet on Ubuntu. Unfortunately, that was not the case on Ubuntu 20.04. The adapter works fine and doesn’t require any driver installation on Windows 10. I have ordered TP-Link AC600 (ARCHER T2U, V3) from CoolBlue which is dual band WiFi-adapter! That means it can operate on 5GHz and 2.4GHz networks, and that’s great!

#TP LINK WIRELESS USB ADAPTER DRIVER ARCHER PC#

The PC has no WiFi-adapter, so I had to order a new one. It may not be fast enough for you, but for me, it’s good enough, especially because it’s a wireless connection! My internet subscription from Tele2 is 100Mbps, so getting 95Mbps over WiFi is really good ^_^ I have two laptop and both of them have buit-in WiFi (dual band) which delivers a decent internet speed (check the screenshot): The internet modem is a bit far from my room, so it’s not really a solution to use any cables! Last week, I got a PC, and I have installed it in my workroom where I work, study and make music (I have been working from home just like everyone else in the world since the outbreak of COVID-19). I’ve always used laptops because it’s much easier and they give you freedom to work everywhere without almost no limitation except the battery life. After rebooting the adapter kept showing up and working.įor posterity I was on git branch v5.6.4.2 in that repo: commit b8167e66b4ac046b3b76c2c40008d84528e91594 (HEAD -> v5.6.4.2, origin/v5.6.4.I haven’t had a PC for the last 10 years. Sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' MakefileĪfter that running ip a showed the new wireless adapter. Sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefile Sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile

#TP LINK WIRELESS USB ADAPTER DRIVER ARCHER INSTALL#

sudo apt-get install -y raspberrypi-kernel raspberrypi-kernel-headers # slow Some of these commands took several minutes to run, over 10 minutes for a couple of them. TP-Link Nano USB Wifi Adapter- AC600 2.4G/5G Dual Band Wireless Network Adapter for Desktop PC (Archer T2U Nano).#deb-src jessie main contrib non-free rpi

# Uncomment line below then 'apt-get update' to enable 'apt-get source'

SMSC9512/9514 Fast Ethernet Adapterīus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.īus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubĬan somone please help me get this Wireless USB to work?Īs requested, here is my sources.list : deb jessie main contrib non-free rpi Output of lsusb: Bus 001 Device 004: ID 148f:761a Ralink Technology, Corp.īus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. I also tried to run sudo apt-get install linux-headers-generic but I ran into the error Package 'linux-headers-generic' has no installation candidate but I'm not sure if I need this? Makefile:403: recipe for target 'LINUX' failed Make: /lib/modules/4.1.19-v7+/build: No such file or directory. Sudo cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat I was following a guide for Ubuntu but it looks like i'm missing something but I don't know what.īelow are the steps I followed (without success): sudo apt-get install git build-essential I'm trying to install my TP-LINK AC 600 (T2UH) wireless USB adapter on my Raspberry Pi 3b running Raspbian Jessie Lite.

Tp link wireless usb adapter driver archer